New Features in 505Server, v2.06
- Added an interface to help support communication type backups within FTLogger. Also added a notification to PLCWorkShop and other clients in the event of a read failure.
- Added more descriptive FMS error messages.
Bug Fixes in 505Server, v2.06
- The server now accepts TCPIP addresses that contain 0.
- The server now shuts down correctly after having been initiated by Wonderware.
- Failure to initialize a COM port can cause an exception. This may not be detected by a release version.
- The server no longer has to be shut down and re-started after experiencing a communications problem in FMS.
- Fixed the deadlock sometimes experienced after having opened a COM port and receiving the error “Device is already open with different settings.”
- No more server hang after closing a port.
- Fixed the occassional error created by adding an OPC group.
- Fixed a rare timing problem whereby an application error could happen when removing a packet while communicating online.
New Features in ModServer, v2.06
- Add support for 4x bits in the form TEEEEE:BB or T:E:BB.
- Added an interface to help support communication type backups within FTLogger. Also added a notification to PLCWorkSHop and other clients in the event of a read failure.
- Added support for TCP/IP Dynamic Routing.
Bug Fixes in ModServer, v2.06
- Its possible for the server to hang after closing a port.
- Ambiguous PLC protocol errors 0xA and 0xB can have two different errors.
- Fixed sending a Network equation of size 79 bytes to Quantum PLC.
- Fixed communication to an E275 PLC, which while in an error state, the server get a SPF when an Attach is attempted.
- Fixed the occassional error created by adding an OPC group.
- Fixed a rare timing problem whereby an application error could happen when removing a packet while communicating online.
New Features in PLC5Server, v1.11
- Added an interface to help support communication type backups within FTLogger. Also added a notification to PLCWorkSHop and other clients in the event of a read failure.
Bug Fixes in PLC5Server, v1.11
- Fixed the possibility of the server hanging after closing a port.
- Fixed a rare timing problem whereby an application error could happen when removing a packet while communicating online.
New Features in SLCServer, v1.11
- Added an interface to help support communication type backups within FTLogger. Also added a notification to PLCWorkSHop and other clients in the event of a read failure.
Bug Fixes in SLCServer, v1.11
- Fixed the possibility of the server hanging after closing a port.
- Fixed a rare timing problem whereby an application error could happen when removing a packet while communicating online.
New Features in DemoServer, v1.11
- Added an interface to help support communication type backups within FTLogger. Also added a notification to PLCWorkSHop and other clients in the event of a read failure.
New Features in FTAlarm, v3.00
- Added graphics capabilities in the form of customizable alarm buttons. FTAlarm is separated into two views now; list view and graphics view.
- Added support in the graphics view for DIB’s and Metafiles.
- Added Undo/Redo capabilities to the graphics view.
- Upgraded to FTServer 1.3 type library.
- Added storage for remote and backup servers as well as backup communication types. The interface is not yet supported.
Bug Fixes in FTAlarm, v3.00
- Fixed exceptions when displaying items such as the control in the device source config dialog.
- Fixed exceptions when online and a loading a new configuration file from the Device Source Configuration dialog.
- Fixed FTAlarm to be able to receive events from our newest servers.
- Fixed a resource leak when creating a brush. This is the same bug that causes a lockup in WorkShop when a user does a large rewire or does many edits before verifying.
- In WIN2000, when bringing up the open/save dialog, a lockup can occur if the “My Documents” or “My Briefcase” folder is selected. This is a known Microsoft problem.
New Features in FTLogger, v2.00
- Added support for remote servers.
- Added fault tolerance for communication types and servers.
- Added import of Wonderware Comma Separated Value (CSV) files.
- Converted log status window to a dockable window. This improves the interface by separating the log sheets from the log status window with “splitter ” type functionality.
Bug Fixes in FTLogger, v2.00
- Corrected problem of two users being logged in to the same SQL database table, where client1 can get database errors after client2 connects to the database. This happens when client2 attempts to change the DATETIME field from Date/Time to Float or visa versa. This is most likely a problem because DATETIME is a primary field. Access is not a problem.
- Corrected problem of getting duplicate row database errors from a logsheet that is using complex events.
- Corrected problem of memory leaks and exceptions when online and attempting to modify the logging method to use complex events and there is an error with the event.
- Corrected problem of no existing valid tables when going online with two log sheets, both logging addresses from the same device. Set up one of the sheets to log to a fixed column based database. Go offline with the log sheet that is logging to the column based database and edit the log sheet by adding an address (make sure the other log sheet is still online).
- Corrected the exception when, after having loaded a log file with no log sheets, and previously having a log sheet up.
- Corrected the issue of checking the span time to just before data is needed.
- Corrected the import of Modicon documentation and converting 5-digit addresses to 6-digit.
- Corrected the GPF when entering and then deleting a single address in a sheet.
- Corrected the problem of when the timestamp in the log sheet is formatted to display only the date, only one log per day is permitted.
- Corrected the problem within FTLogger when it may not be able to receive events from the newest servers making it impossible to get data values.
- Corrected the problem of, when in Windows 2000, and when bringing up the open/save dialog, a lockup can occur if the “My Documents” or “My Briefcase” folder is selected. This is a known Microsoft problem. See knowledgebase article Q287087.
- Corrected the problem of when attempting to open Access97 database files can sometimes bring up the error “unknown database format” when in Microsoft Access 97.
- Corrected the problem of when changing database options from “Setup – Options” dialog will prompt the dialog that asks the user if they want to save their changes when exiting FTLogger. This implies that the changes are saved to a file when in reality they are saved to the registry when selecting “OK” from the options dialog.
New Features in FTTrend, v1.30
- Upgraded to FTServer 1.3 type library.
Bug Fixes in FTTrend, v1.30
- Corrected problem .CFG files created in most recent versions of FTLogger, FTDatawin, and FTAlarm are not compatible with FTTrend.
- Corrected the problem where FTTrend may not be able to receive events from our newest servers making it impossible to get data values.
- Corrected problem where, while in WIN2000, and when bringing up the open/save dialog, a lockup can occur if the “My Documents” or “My Briefcase” folder is selected. This is a known Microsoft problem. See knowledgebase article Q287087.
New Features in FTBatch, v1.10
- Upgraded to FTServer 1.3 type library.
Bug Fixes in FTBatch, v1.10
- Corrected problem where .CFG files created in most recent versions of FTLogger, FTDatawin, and FTAlarm are not compatible with FTBatch.
- Corrected problem where, while in Windows 2000, and when bringing up the open/save dialog, a lockup can occur if the “My Documents” or “My Briefcase” folder is selected. This is a known Microsoft problem. See knowledgebase article Q287087.exceptions could occur when displaying items in the list in the device source configuration dialog.
New Features in FTDataWin, v1.31
- Changed background colors in data sheet icons to make them more visible.
- Upgraded to FTServer 1.3 type library.
Bug Fixes in FTDataWin, v1.31
- Corrected problem where FTDatawin may not be able to receive events from our newest servers making it impossible to get data values.
- Corrected problem where, while in Windows 2000, and when bringing up the open/save dialog, a lockup can occur if the “My Documents” or “My Briefcase” folder is selected. This is a known Microsoft problem. See knowledgebase article Q287087.
New Features in FT_OPCConfig, v1.02
- Added support for Modicon TCP/IP setup 3 and 4.
- Upgraded to FTServer 1.3 type library.
Bug Fixes in FT_OPCConfig, v1.01
- Corrected problem where the SA85 route was not getting saved to the registry correctly. Only the first out of five values was being saved.
- Corrected problem where exceptions could occur when displaying items in the list in the device source configuration dialog.